ordering code: musbr - ahd2 - x x1 xx c to +105 c. consult with amphenol canada for other options or special requests. to order cable ties separately, specify p/n musbr-2ahd-501bp. 9. operating temperature -55 hood, boot style series, rugged usb do not require a grommet. t = thumb screw - m3 x 0.5 thread, translucent boot s = screw - m3 x 0.5 thread, translucent boot m = thumb screw - m3 x 0.5 thread, black boot l = screw - m3 x 0.5 thread, black boot 8 = thumb screw - #4-40 unc thread, translucent boot 41 = with both 4.50 [.177] & 6.40 [.252] grommets 31 = 6.40 [.252] inside diameter grommet 21 = 4.50 [.177] inside diameter grommet 01 = no grommet grommet option standard part number - musbr-ahd2-241s k for stock in distribution 10. notes this hood is suitable for use with amphenol rugged modular jacks & usb series a receptacles - amphenol 1. series mrj, mrjr, musb-a & musbr-a (standard profile). kit contains one boot, one cover plate, up to two split grommets, one cable tie, two screws & two washers. 2. screws & washers are supplied pre-assembled to the cover plate. screws will float & be captured by the cover plate to minimize loss of parts during use. the hood can be field or factory assembled over exi sting standard usb or rj plugs that are already 3. terminated to a cable. see drawing sheet 3 for a suggested assembly proce dure. for improved sealing performance, the use of a cable tie gun to tighten the cable tie is recommended (example: paladin tools cable tie gun p/n 1828.1 with setting 1). the assembly procedure can be altered to suit customer preferences or requirements. customer panel requires two additional mounting ho les. these holes are recommended to be blind/sealed 4. holes so that enclosure remains sealed. in unmated co ndition, receptacle maintains enclosure seal. in mated condition, boot assembly ensures seal of mating interface area. boot accordion section allows flexibility for cabl e tie location along cable lengthwise. this may be 5. necessary to suit extra long plug over-moulds or to avoid ferrites moulded into the cable. if a mating receptacle & panel are not available during boot assembly, the accordion section also allows flexibility for the boot flange location. flexibility of boot permits plug/receptacle interf ace to be unmated & re-mated without dis-assembly or 6. removal of the plug hood. this feature simplifies equi pment test & diagnostics in field service applications. material: all materials are rohs compliant per eu directive 2011/65/eu & amendments 7. boot: flexible rubber, black & translucent options ? cover plate: thermoplastic polyester or nylon, glass reinforced, black ? hardware: stainless steel ? cable tie: nylon, black ? grommet: silicone rubber, black ? grommet code 21 (4.50 [.177] i.d.) is suitable for cables up to 4.50 [.177] outside jacket diameter. grommet code 31 8. (6.40 [.252] i.d.) is suitable for cables between 4.50 [.177] & 6.50 [.256] outside jacket diam eter. larger diameter cables screw, thread & boot options 2 = screw - #4-40 unc thread, black boot 3 = thumb screw - #4-40 unc thread, black boot 7 = screw - #4-40 unc thread, translucent boot packaging options bp = bulk packed, components bagged separately in carton sk = single kit, components for each hood in single bag 1 3 4 5 6 5 4 3 h g f e d c b a ab cdef gh 2 1 2 03554 ek.l. k.l. 3 e scale: rev dwg. no. 6 of www.amphenolcanada.com code id no. description, ecn, ear no. app'd date rev revisions amphenol canada corp. any purpose or used for manufacturing purposes with out written permission fr om amphenol canada corp. P-MUSBR-AHD2-XX1XX this document contains proprietary information and such information ma y not be disclosed to others for 1 mating interface, rohs compliant b.copping dwg size: boot style design, for sealing musbr hood for usb or rj plug, drawing dec5/14 dec5/14 jun6/16 2:1 x drawn checked m.e. app'd q.a. app'd dwg appr. eng. rel. no. ref. scale do not projection millimeters inches primary units secondary reference in parentheses unless specified otherwise angle third sheet mar30/16 product drawing (ear 14357) d ear 14327 angular degrees k.lambie general tolerances 1 decimal place 2 decimal places 3 decimal places product drawing (ear 14357) assembly with thumb screw shown screw cable tie panel customer panel screws supplied receptacle connector by customer to be purchased separately. see note 1. boot musb, musbr, mrj or mrjr connector (pre-assembled) cover plate for customer panel split grommet customer. see note 1. over-mould supplied by holes recommended usb or rj plug with blind/sealed threaded washer (pre-assembled)
03554 3 4 5 6 5 4 3 h g f e d c b a ab cdef gh 2 1 2 jun6/16 ek.l. d 3 e scale: rev dwg. no. 6 of www.amphenolcanada.com code id no. description, ecn, ear no. app'd date rev revisions amphenol canada corp. any purpose or used for manufacturing purposes with out written permission fr om amphenol canada corp. P-MUSBR-AHD2-XX1XX this document contains proprietary information and such information ma y not be disclosed to others for 2 mating interface, rohs compliant b.copping dwg size: boot style design, for sealing musbr hood for usb or rj plug, drawing dec5/14 dec5/14 1 2:1 x drawn checked m.e. app'd q.a. app'd dwg appr. eng. rel. no. ref. scale do not projection millimeters inches primary units secondary reference in parentheses unless specified otherwise angle third sheet k.l. mar30/16 product drawing (ear 14357) ear 14327 angular degrees k.lambie general tolerances 1 decimal place 2 decimal places 3 decimal places product drawing (ear 14357) 27.00 1.063 panel screw head of receptacle clearance for .236 6.00 1.575 40.00 .984 25.00 .638 16.20 .559 14.20 9.00 .354 cable tie area accordion section 15.60 .614 flange boot 0.70 .028 .315 8.00 86.29 3.397 screw pull tabs see ordering code #4-40 or m3 thread screw in forward position .167 17.60 .693 3.055 77.59 4.25 15.00 .591 see ordering code for grommet options 11.60 .457 will stretch over plug #4-40 or m3 thread thumb screw see ordering code view with thumb screws shown 4.25 .167 15.20 .598 cover plate #4-40 or m3 thread 5.00 [.197] thread depth in blind hole, 2 plcs outside panel view recommended panel cutout profile 9.00 .354 2 plcs .652 16.55 .573 4 plcs .054 r1.38 3.250.08 2 plcs .128.003 14.55 24.00 .945 typ 4.50 .177 27.00 1.063
of boot & cover receptacle. mate plug into step 5 align perimeter threaded holes blind or sealed customer panel with installed receptacle place over plug cable & slide open grommet along split line, step 7 boot ribs grommet into position between boot ribs step 6 slide hood up to panel & secure hood screws hood screw cable tie gun secure using cable tie, position grommet central to boot ribs step 8 secure cable tie in middle of boot ribs. cable tie gun (example: paladin tools p/n 1828.1 with setting #1) 03554 3 4 5 6 5 4 3 h g f e d c b a ab cdef gh 2 1 2 jun6/16 e product drawing (ear 14357) product drawing (ear 14357) 3 e scale: rev dwg. no. 6 of www.amphenolcanada.com code id no. description, ecn, ear no. app'd date rev revisions amphenol canada corp. any purpose or used for manufacturing purposes with out written permission fr om amphenol canada corp. P-MUSBR-AHD2-XX1XX this document contains proprietary information and such information ma y not be disclosed to others for 3 mating interface, rohs compliant b.copping dwg size: boot style design, for sealing musbr hood for usb or rj plug, drawing dec5/14 dec5/14 1 2:1 x drawn checked m.e. app'd q.a. app'd dwg appr. eng. rel. no. ref. scale do not projection millimeters inches primary units secondary reference in parentheses unless specified otherwise angle third sheet mar30/16 k.l. d ear 14327 angular degrees k.lambie general tolerances 1 decimal place 2 decimal places 3 decimal places k.l. field assembly procedure step 4 use pull tabs to pull boot over plug. boot cover plate. pull boot through step 1 pull boot use tabs to cover plate until boot flange almost touches cover plate. step 2 continue to pull boot boot rib step 3 insert plug partially into the boot. usb or rj plug cover plate groove
|
